|
Radio control is a system comprising at least one receiver and one or more transmitters, which, using radiofrequency technology, can remotely activate a device controlling gates, doors, garages, activation of alarm systems, lights, burglar-proof control, access control, etc.
Prastel has designed and manufactured radio controls for over 25 years and has introduced major innovations in the sector, some of the most important of which include:
| 1983 |
|
Dip-switch transmitters with 1024 combinations. |
| 1984 |
|
Transmitters with side keys |
| 1991 |
|
Prastel presents the revolutionary system that self-learns differentiated Tx codes on the relative receiver equipped with extractable memory modules that are manageable via terminal. Introduces the concept of management of different transmitter codes in the memories.
Also the concept of using remote controls in access control. |
| 1993 |
|
Prastel introduces the possibility of remote controlling the acceptance of new transmitters (R.P.A.) on an Rx, via an enabled transmitter. |
| 1996 |
|
The ROLLING-CODE system takes the place of MULTIPASS.
This variable code system is still unique and inimitable. |
| 1997 |
|
Transmitters with multi-signal LEDs (battery saver, self-retaining, optic transmission). |
| 1998 |
|
Transmitters with conductive rubber keys and lithium batteries. |
| 1999 |
|
Transmitters with dual technology (radio 433.92 Mhz + proximity at 125 KHz). |
| 2003 |
|
Easy-Roll system. Possibility of assigning an installer code or a system code to remote control, without opening the packaging (via radio), or making a copy of another transmitter with known code. |
| 2005 |
|
“Remote Force Control” Function: RFC®. For changing (emergency), with the same transmitter enabled for opening, the operating force and obstacle sensitivity programmed on one of our control units to open an automatic gate that does not activate with preset force. |
| 2006 |
|
BFOR transmitter.
Prastel has to date produced over 15 million transmitters. |
|
History